Steps for commencing the test using a UV weathering chamber
In this uv light acceleration chamber, Test samples are subjected to a predetermined level of UV radiation for a predetermined amount of time. Specialized lamps that emit UVA and UVB wavelengths are installed within the chamber. These lamps have filters that block dangerous UVC rays, simulating the atmosphere of Earth. Manufacturers can readily adhere to the following steps to accurately conduct the test using the Effective Lab’s uv accelerated weathering tester.- It’s simple to set the HMI screen and set the value after the testing specimen is in the UV test equipment.
- To determine the amount of time the spray will be applied to the test specimen, adjust the Spray “ON/OFF Time.”
- Turn on every switch on the screen, including the Rotate, Spray, Light, Heat, and Timer buttons, after all the values have been set on the HMI screen.
- Shut the instrument’s door.
- After the predetermined amount of time, press the Start button on the HMI screen, and the machine will shut off on its own.