Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern thieves can rob a car in less than a minute. They make use of the car’s OBD port to hack the ECU & then duplicate a key, all from a hidden laptop in the car.

The Autowatch Ghost 2 immobiliser reviews [telegra.ph] immobiliser can prevent this by sending pin codes to the buttons on your vehicle (steering wheels & central console). It is completely inaccessible to anyone else in your vehicle.

No key fobs or LED indicators, or any other methods of locating the vehicle are accessible.

The ghost immobiliser installers near me immobiliser is the most effective way to prevent keyless entry theft and key cloning. This device safeguards your vehicle from these types of attacks by preventing the engine from running after a valid pin code has been entered. This is a very effective method of safeguarding your car, and insurance companies recognize it as a security measure that can reduce the cost of your insurance.

The way in which the ghost works is through connecting to your vehicle’s CAN data network, once installed by us at Car Theft Solutions it will only begin when you press the exact sequence of buttons using your personalised override code. This means that any attempt to start the vehicle without entering this code will be met by a loud siren and the engine will not start. The thief then realizes that they’ve been taken prisoner and will likely leave the vehicle.

One of the main advantages of this system is that it doesn’t transmit any signals as the tracker, which means that thieves can’t utilize RF signal receivers in order to locate your ghost immobiliser fitting device. It also doesn’t send out any IR (infrared) signals like the typical remote key fobs to control the device or tracker do, which makes it extremely difficult to deceive or hack.

Another advantage of the ghost is that it features an option for valet parking that can be activated when you hand your vehicle over for valet parking or servicing. The immobiliser will be disabled CAN for 30mph and allow you to drive in normal fashion using your key fob. When the vehicle is set up again, the Ghost will return to full functionality.

Car Theft Solutions is the location to call for information more about ghost immobilise, or should you wish to have it installed in your vehicle. We are a family-owned business with more than 10 years of experience in security for vehicles. This includes the Ghost immobiliser installation. We are a Thatcham approved installer of Ghost products and have built our name on the basis of customer satisfaction.

No cloning, hacking or altering

The Autowatch Ghost is one of the most advanced immobilisers on the market, it protects your vehicle from hacking or key cloning, making it near impossible to steal. The only way thieves could take your vehicle is to physically tow it away. Even then, they won’t be able to start the engine.

This is because, unlike other immobilisers which only prevent the vehicle from starting if they don’t have your fob, this clever system actually disconnects the engine control unit so that the vehicle cannot be started. It operates by sending a signal to buttons on your steering wheel and door panel, as well as your centre console that can only be deactivated by entering the correct pin code configuration It is this feature that makes the Ghost so hard to crack.

Its sleek and discreet design allows it to fit seamlessly into your vehicle without the requirement for additional keys or LED indicators. It functions independently of the factory tracker or alarm. It is a CAN-bus immobiliser, which means it is part of your vehicle’s control network and does no interfere with other devices such as your car’s key fob or alarm.

This exclusive technology is not visible to thieves and other systems that rely on RF scanning and code grabbing. It only transmits a series of pin codes in a silent manner through the buttons on your vehicle’s steering wheels doors, door panels or central console. The Ghost is a revolutionary device that protects your vehicle from theft of keyless entry and smart key theft. It does this by creating an individual pin code which needs to be entered to disable the device.

The number of vehicles with keyless entry in circulation is increasing. Thieves are becoming more sophisticated and employ devices to clone your vehicle that can be purchased through classifieds or online for less than PS15. They can then use this cloned fob to gain access to your vehicle. The standard immobiliser will only stop the car from starting if the criminal has your original key fob. This isn’t enough protection and it’s very easy for criminals to jam or fake signals to unlock the vehicle.

Valet mode

Standard immobilisers installed to your vehicle employ an electronic chip to send signals. The system will then search for the code sent by the key to start the car. If the signal isn’t received, it will simply cut off and stop the engine from getting started. This is the basic principle behind all aftermarket immobilisers and is a vital security measure to ensure that your vehicle isn’t stolen even if someone else has your keys or a device that could boost your key fob signal.

Ghost immobilisers do more than simply stop this. The system, which sits on the CAN bus of your Mercedes, is programmed with a unique PIN code push sequence that must be entered to start the vehicle. This is then locked in your application, and no anyone else will be able to access it without having the same pin that you have.

The system will also stop cloning, signal jamming and hacking (which thieves could use to bypass the immobiliser on your vehicle). If a burglar manages to get their hands on the keys to your car or fob, they will not be able start your vehicle even if it’s in a nearby parking lot. They might only steal your car off a flatbed truck, which is highly unlikely.

Valet mode comes as a standard feature with your ghost immobiliser. When it is activated the glove box and trunk will be locked, so that anyone stealing your car will not have any personal items to take. It will also limit the speed of your Tesla to ensure it can’t be driven at speeds of more than 70mph. It also will disable absurd modes. It will also lock your driver profiles and conceal your home and work addresses so that no one other person can access your personal data on your Tesla dashboard.

If you want to make use of your car for valet parking or for service purposes, just select the ‘Valet/Service’ option in the dashboard app and then enter the 4-digit valet pin you have on the touchscreen. The alarm will cease to work, however the car will not start until you have entered an authentic pin. This is perfect for people who need to give their car over to others for ghost Autowatch Immobiliser repair, such as taxi drivers and garage mechanics.

The first aftermarket immobiliser for CAN buses

The Autowatch Ghost is the world’s first aftermarket CAN bus immobiliser. It offers security that is unparalleled by anything available today. It safeguards you from key hacking or cloning, and even theft of keys. This is accomplished by integrating into your vehicle’s current interface. It doesn’t require remotes or fobs in addition to it but integrates into your vehicle’s CAN data network. This makes it a stealth gadget.

The device is a hidden circuit board that connects to the engine management system in your car (ECU) and functions in a non-silent manner. When activated, it will stop the car from starting until the PIN is entered. This is the code you will receive when you request an installation. This number is required to enable valet mode, disable the alarm or allow you to drive away in your friends car (if they have a Ghost installed as well).

It is designed to ensure that it can’t be seen by anyone who is looking into your cars interior, does not transmit radio signals, and is only heard when it’s being activated. It can be placed in many different places and is nearly impossible to spot. It is also low-maintenance and can be utilized in combination with other anti-theft systems, such as trackers (Brand dependent) for the complete solution.

Many people choose to fit an immobiliser that ghosts because they believe that standard security isn’t enough to prevent their pride and joy from being stolen. Physical deterrents such as wheel clamps and locking mechanisms for steering wheels are excellent alternatives, but they are not considered “theft-proof” by thieves as they are easily beaten with the appropriate tools. A ghost immobiliser is, however, unable to be bypassed by a thief since it is concealed within the vehicle and if activated, it would shut down parts like the starter motor or fuel system.

Ghost immobilisers can be installed for just PS450 which is a fraction of what other products cost. It also prevents your vehicle from being taken. If you’re looking to add an extra layer of security to ensure your pride and joy is safe and sound, then contact us today and we can arrange it for you. We accept credit card payments and offer a 3-month interest-free credit through Klarna.