Are you tired of weak Wi-Fi signals limiting your online activities? The Reyee REX12 Wi-Fi Extender setup could be the solution you’re looking for! In this guide, we’ll walk you through the setup process step by step, using both the WPS method and the web-based method. We’ll also cover how to log in, reset, update firmware, and even set up your extender as an access point.
Getting Started with the Reyee REX12 Wi-Fi Extender
Before we dive into the setup process, let’s briefly discuss what the Reyee REX12 Wi-Fi Extender can do for you. This powerful device is designed to extend the range of your existing Wi-Fi network, ensuring that you have a strong and reliable connection throughout your home or office.
What You’ll Need
To get started, make sure you have the following:
- Reyee REX12 Wi-Fi Extender
- A computer or mobile device with Wi-Fi capability
- Access to your existing Wi-Fi network
Step 1: Connecting the Reyee REX12 Wi-Fi Extender
- Place the Extender: Position your Reyee REX12 Wi-Fi Extender within range of your existing Wi-Fi network. Ideally, it should be placed in an area where the Wi-Fi signal is weak.
- Power On: Plug the extender into a power outlet and wait for it to power on. The indicator lights on the extender will help you determine when it’s ready for setup.
- Connect to the Extender: On your computer or mobile device, locate the Wi-Fi network named “REYEE-REX12” and connect to it. The default password can usually be found on a sticker on the extender itself.
- Access the Setup Page: Open a web browser and enter “192.168.10.1” in the address bar. This will take you to the Reyee REX12 setup page.
- Follow the On-Screen Instructions: The setup wizard will guide you through the process of configuring your extender. Follow the on-screen instructions carefully, making sure to select your existing Wi-Fi network and enter the password when prompted.
- Complete the Setup: Once you’ve entered all the required information, click “Apply” or “Save” to complete the setup process. Your Reyee REX12 Wi-Fi Extender should now be connected to your existing Wi-Fi network and ready to use.
Step 2: Reyee REX12 Wi-Fi Extender setup Using WPS
If your router supports WPS (Wi-Fi Protected Setup), you can use this method to quickly and easily connect your Reyee REX12 Wi-Fi Extender setup .
- Press the WPS Button: On your Reyee REX12 Wi-Fi Extender, press the WPS button. The WPS LED on the extender should start blinking.
- Activate WPS on Your Router: Within 2 minutes, press the WPS button on your router. The WPS LED on the extender should stop blinking and become solid, indicating a successful connection.
- Verify Connection: Once the WPS LED is solid, your Reyee REX12 Wi-Fi Extender is connected to your router. You can now move the extender to a location where you need a stronger Wi-Fi signal.
Step 3: Logging In to Your Reyee REX12 Wi-Fi Extender
To log in to your Reyee REX12 Wi-Fi Extender and access its settings, follow these steps:
- Connect to the Extender: Make sure your computer or mobile device is connected to the “REYEE-REX12” Wi-Fi network.
- Access the Login Page: Open a web browser and enter “192.168.10.1” in the address bar. This will take you to the login page for your extender.
- Enter the Default Credentials: The default username and password for the Reyee REX12 Wi-Fi Extender are usually “admin” for both. If you’ve changed these credentials, use the ones you set.
- Access Settings: Once logged in, you can access and customise the settings of your Reyee REX12 Wi-Fi Extender to suit your needs.
Step 4: Resetting Your Reyee REX12 Wi-Fi Extender
If you ever need to reset your Reyee REX12 Wi-Fi Extender to its factory default settings, follow these steps:
- Locate the Reset Button: The reset button is usually located on the side or bottom of the extender.
- Press and Hold the Reset Button: Using a paperclip or similar tool, press and hold the reset button for about 10 seconds.
- Wait for the Extender to Reboot: After releasing the reset button, wait for the extender to reboot. This may take a few minutes.
- Reconfigure Your Extender: Once the extender has rebooted, you’ll need to reconfigure it using the setup process outlined earlier in this guide.
Step 5: Updating Firmware on Your Reyee REX12 Wi-Fi Extender
Regular firmware updates ensure that your Reyee REX12 Wi-Fi Extender is operating at its best. Here’s how you can update the firmware:
- Check for Updates: Log in to your extender’s settings page and look for a firmware update option. This is usually found in the “Administration” or “Maintenance” section.
- Download the Firmware: If a new firmware version is available, download it to your computer.
- Upload the Firmware: In the extender’s settings page, look for the option to upload the firmware file. Select the file you downloaded and follow the on-screen instructions to update the firmware.
- Wait for the Update: The extender will reboot once the firmware update is complete. This may take a few minutes. Do not interrupt the update process.
- Verify Update: After the extender has rebooted, log in to the settings page again to verify that the firmware has been successfully updated.
Step 6: Setting Up Your Reyee REX12 Wi-Fi Extender as an Access Point
If you want to use your Reyee REX12 Wi-Fi Extender setup as an access point, follow these steps:
- Connect to the Extender: Make sure your computer or mobile device is connected to the “REYEE-REX12” Wi-Fi network.
- Access the Settings Page: Open a web browser and enter “192.168.10.1” in the address bar to access the extender’s settings page.
- Change the Mode: In the settings page, look for the option to change the mode of your extender. Select “Access Point” mode.
- Configure Settings: Follow the on-screen instructions to configure the access point settings, such as the SSID (network name) and password.
- Apply Changes: Once you’ve configured the settings, click “Apply” or “Save” to apply the changes. Your Reyee REX12 Wi-Fi Extender is now set up as an access point.
Conclusion
By following the steps outlined in this guide, you can easily Reyee REX12 Wi-Fi Extender setup to improve the range and reliability of your Wi-Fi network. Whether you’re using the WPS method or the web-based method, the setup process is straightforward and user-friendly. With your extender properly configured, you can enjoy a strong and stable Wi-Fi connection throughout your home or office.